Strip & Brite MSDS

Click here to download a PDF of this MSDS document.

SECTION 01: PRODUCT & COMPANY IDENTIFICATION

US Manufacturer:
Heartwood Corporation / Timber Pro UV
2232 E. Burnside Ave
Portland, Or 97214
Ph (503) 232-1705

Canadian Manufacturer:
Timber Pro Coatings LTD
6251 Graybar Rd, Unit 130
Richmond B.C. Canada V6W1H3
Ph (604) 270-4244

Trade Name/Synonyms: Strip & Brite, Wood Stripper Step #1
Chemical Name: mixture
CAS Number: N/A
Chemical Formula: proprietary

SECTION 02: HAZARDOUS INGREDIENTS

			Maximum Exposure
Ingredients	CAS #	Content	LD50s and LC 50s Route and species
Sodium Hydroxide	1310-72-3	5
Potassium Hydroxide	1310-58-3	5

SECTION 03: PHYSICAL DATA

Boiling Point: 212° F
Vapor Pressure: N/A
Melting Point: N/A
Vapor Density: 2mg m/3
Water Solubility: complete
Specific Gravity: 1.1 Appearance: orange-red
Evaporation Rate: 1.2

SECTION 04: FIRE AND EXPLOSION HAZARD DATA

Flash Point: N/A
Flammable Limits
Upper: N/A
Lower: N/A
Fire Fighting
Instruction: Cool containers with water spray.
Unusual Fire/Explosion Hazard: None.

SECTION 05: HEALTH HAZARD DATA

Summary: Contact with eyes or skin can be irritating. Ingestion can cause nausea. Provide adequate ventilation when working around product.

Eye Contact: May be irritating to eyes. If contact is made, wash with cold water on eyes and under eyelids for 15 minutes.
Skin Contact: Irritating to skin. If contact is made, wash with cold water for 15 minutes or until irritation stops. See a physician if irritation persists.
Skin Absorption: Irritating to skin. If contact is made, wash with cold water for 15 minutes or until irritation stops. If irritation persists, see a physician.
Inhalation: Can cause headaches and dizziness. If symptoms occur, seek fresh air immediately.
Ingestion: May cause nausea and vomiting. If ingested, induce vomiting and seek physician immediately.
Chronic Effects of Overexposure: None known.
Other Health Effects: None known.

SECTION 06: REACTIVITY DATA

Stability: Stable
Incompatibility: May react with some mineral and organic acids.
Hazardous Decomposition: Will not occur
Hazardous Polymerization: Will not occur

SECTION 07: SPILL OR LEAK PROCEDURES

In Case of Spill: Berm spill immediately and place spill into a container approved for waste.
Disposal Method: Dispose of according to local, state, and federal regulations.

SECTION 08: SPECIAL PROTECTION INFORMATION

Eye Protection: recommended, use goggles when working with product
Respiratory: recommended
Protective Clothing: recommended, use protective gloves and clothing
Ventilation: provide adequate ventilation
VOC: 0

SECTION 09: SPECIAL PRECAUTIONS

Always wear protective and chemically resistant clothing and goggles when working around chemicals. Never mix other cleaning compounds together. Keep away from from sources of heat, flame, and direct sunlight. Store containers where they are cool but will not freeze.

Disclaimer: The information and data contained herein is based upon facts considered to be correct as of the date hereof. Information is supplied upon the condition that the persons receiving will make their own determination as to its suitability for their purposes prior to use.